What Your Disposal Is Telling You
| Symptom | What it usually means | Likely fix |
|---|---|---|
| Hums but does not spin | Jammed grinding plate | Free the jam and reset |
| Silent and no hum | Tripped reset, power or a dead motor | Check power, then replace if dead |
| Leaks from the bottom | Cracked housing or failed seal | Replace the unit |
| Leaks from the top | Sink flange or gasket failure | Reseat or replace the flange |
| Leaks at the side pipe | Loose drain connection | Tighten or replace the gasket |
| Smells and drains slowly | Buildup in the drain line | Clean the drain and trap |
A jam is usually a repair. A leak from the body of the disposal means the housing is done, and replacement is the honest answer.
Safety FirstSafe Steps Before You Call
Never put your hand in a disposal
- Switch off the disposal and the breaker before touching anything
- Use a wooden spoon handle or a tool to free a visible jam
- Press the red reset button on the bottom after the jam clears
- If it leaks, turn off the water under the sink and call
Water Under The Sink At Night
A leaking disposal can soak a cabinet and a floor quickly. Turn off the water supply under the sink, place a bucket under the leak and call the 24/7 line. The dispatcher will tell you how to protect the cabinet while a plumber is scheduled.
Disposal Flooding The Cabinet?
Call and we will help you shut off the water and plan the visit.
Repair Or Replace
Repair when
- The unit hums but is jammed
- A drain connection is loose
- The unit is fairly new and sound
- The reset button restores power
Replace when
- The housing leaks
- The motor is dead
- The unit is old and keeps jamming
- You want a stronger or quieter model
Installing A New Disposal
Replacement includes removing the old unit, cleaning the sink flange, mounting the new unit and connecting the drain and the dishwasher line. The plumber also checks the trap and the sink drain for buildup. The visit usually takes an hour or two.
Choose horsepower by use. A small household with light use does well with a standard unit, while a busy kitchen benefits from a larger motor. We recommend a size and you choose.
Often OverlookedDishwasher Connections
A leak under the sink can be the dishwasher drain hose or air gap rather than the disposal. We check the connections as part of the visit. If the whole kitchen drain is slow, a drain cleaning visit may be needed after the disposal work.
PricingPricing For Disposal Repair
What The Hum Means
A disposal that hums but does not spin is jammed. Switch it off at the wall and at the breaker, then look into the drain with a flashlight. Never put a hand inside, even when the power is off.
Most units have a hex socket on the underside where an Allen wrench can turn the plate back and forth by hand. Many also have a red reset button near the bottom that trips when the motor overheats. If a reset and a hand turn do not free it, the motor or the grinding parts may have failed.
A leak from the bottom of the unit usually means an internal seal has failed and the disposal needs replacing. A leak at the top flange or the drain connection can often be resealed. Run cold water while grinding, feed small amounts at a time, and keep grease, bones and fibrous peels out of the unit.
FAQsGarbage Disposal Questions
Yes. A leaking disposal is a 24/7 call. Turn off the water under the sink and call so we can plan the visit.
A jam in the grinding plate is the usual cause. Switch off power, free the jam with a tool and press reset.
Leaks at the flange or side pipe can often be repaired. A leak from the body usually means replacement.
Most replacements take an hour or two once the unit is on hand.
Grease, fibrous scraps, pits and large bones cause jams and clogs. Run cold water while it is on.
Yes. We reconnect the dishwasher drain as part of the replacement and check for leaks.

